NEW PRODUCTS

To view the PDF product information in this section, you will need a version
of Adobe Acrobat Reader. You can download a free copy of the software here.

Portable U-Line® Receptacles and Ground Fault Circuit Interrupter
  U-Line® GFCIs and receptacles have always provided safety in design and convenience in function. The new portable GFCI provides required ground fault protection for portable electrical devices. Meets all UL and CSA requirements for ground fault protection in both hazardous and non-hazardous locations. They can be used in conjunction with U-Line factory-sealed Model B receptacles or standard 5-20R receptacles on 20A, 125VAC branch circuits.
  More Information on this Series
 

AJBEW Explosionproof Enclosures
  Appleton proudly announces that its’ line of AJBEW explosionproof enclosures are now tri-rated with NEC, CEC and ATEX certifications. These enclosures are also NEMA 4X-rated and can be outfitted with a variety of devices based on your application and certification needs.
  More Information on this Series

ZCB Panelboards
  Appleton®, a worldwide leader in premium industrial electrical equipment, proudly announces the new ZCB Series Panelboard® for use Zone 1 and Class I Division 2 areas. This is the ultimate choice for your power distribution needs.
Protecting and controlling power in hazardous locations is revolutionized with Appleton’s new ZCB Panelboard. Offering a host of features, such as individually sealed circuit breakers and tough, lightweight housings, the ZCB Panelboard simplifies installation and maintenance, ensuring a high level of safety and exceptional durability.
The ZCB Panelboards contain individually sealed, North American circuit breakers with 10,000 ampere interrupting capacity (AIC) housed in a light, durable, watertight enclosure. Additionally, each ZCB Panelboard can be coupled together for controlling power to a boundless number of industrial applications. Just the kind of thorough, innovative products you expect from Appleton.
  More Information on this Series

ASR Series Switched Receptacle
  The new Appleton Switched Receptacle is designed to prevent arcs in adverse locations. This compact product is offered in a non metallic corrosion resistant design for 30 and 60 Amp requirements.
The switched receptacle is designed for safety. A mechanical interlock prohibits plug removal under load. Plug cannot be withdrawn unless switch is moved to “Off” position. If the plug is engaged and the switch is in the “On” position, the user cannot pull the plug out. Conversely, if the switch is off and no plug is present, the receptacle cannot be energized. A padlock can be installed on the handle for additional safety.
• Most compact, highly integrated design on the market.
• Well suited to environments where minimizing contaminants is crucial.
• Easy to service.
• Available in 30 and 60 amp models.
• Fuse or unfused models available.
• Fully compatible with Powertite® plugs.
  More Information on this Series

NEER All-In-One Conduit Bodies
  NEER’s All-In-One series of conduit bodies combine the body, cover and neoprene gasket into one pre-assembled unit, which reduces transaction costs, simplifies product selection and cuts merchandising expense. The All-In-One series comes in two versions: a Threaded hub for Rigid Conduit and IMC, and a Multi-Hub™ Threaded and Set Screw for Rigid Conduit, IMC and EMT. Built for wet locations and engineered for durability, the All-In-One series comes with stainless steel hardware and a powder-coated, epoxy covered, copper-free aluminum alloy exterior.
  More Information on this Series

ETP's FLEXEL™ EMT Flexible Fittings
  Continuing large conduit runs around corners, offsets, compound angles and through misaligned connections no longer requires 1,000 pounds of expensive machinery. FLEXEL™ EMT Flexible Fittings bend to one or more angles up to 90° with just elbow grease, a knee or a hammer. FLEXEL can also be re-bent at will, completely eliminating wasted conduit bends that didn’t fit. Bald fittings on both ends allow for use with set-screw and compression fittings with EMT.FLEXEL comes in 1-1/4" to 4" trade sizes and maintains its internal diameter per NEC specification – even at a full 90°. FLEXEL is UL Listed and CSA Certified.
  More Information on this Series

FM9 Unilets
  Appleton is pleased to introduce the FM9TM family of aluminum conduit bodies. The FM9 Unilet completes the full line of Appleton’s superior conduit body outlets that are interchangeable with all competitors’ footprints. Available in seven different configurations and in ½” to 4” trade sizes, each copper-free aluminum body features a generous, oversized wiring cavity with smoothed conduit stops for easy pulling, splicing or tapping. The FM9’s rugged body delivers accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity. The domed cover further increases wiring capacity and delivers a rain-tight fit with a separate neoprene gasket and cover or Formtite™ Stamped Aluminum Cover with Integral Gasket. The cover also holds the stainless steel pan-head cover screws captive for reduced loss. Suitable for Class I, Division 2 applications. The FM9’s epoxy-free and uncoated finish is ideal for broad application use.
  More Information on this Series

Wallmaster I/2™ Fixture
  Appleton engineered its new Wallmaster™ I/2 to meet the special requirements of Class I, Division 2 hazardous locations, adding an enclosed and gasketed design that inhibits explosive vapors from entering. Class 1, Division 2 areas are found in petrochemical refineries, chemical-processing plants, fueling stations, utilities and other facilities where flammable vapors or gases could exist under abnormal conditions.
  More Information on this Series

Mercmaster III™ Induction Lighting
  The Mercmaster III™ Series has been expanded to include “QL Induction”, the latest lamp technology. “QL Induction” technology takes our Mercmaster III™ to the next level because the system is rated for 20 years (100,000 hours). At the end of 60K hours, you should still have 70% of your total light output. Current lamp types (fluorescent, mercury, metal halide, pulse start metal halide and high pressure sodium) have a life expectancy is 3 to 5 years.
  More Information on this Series

Watertight Pin and Sleeve
  IEC 309-2 Coniguration; 20-100 AMP, 210-600 Volt
  More Information on this Series

N2LS Series Non-Metallic Emergency Lighting System
  Provides emergency lighting in the event of a power outage in Class I, Div. 2, Groups B, C and D locations. Available for use with remote and/or direct mounted fixture heads.
  More Information on this Series

Stylmaster Strobe and Beacon Enclosed and Gasketed Fixtures
  Offers a means to warn of unsafe conditions or convey communication needs in Class I, Div 2, Groups A, B, C and D and Class II, Div. I and 2, Group E, F and G locations, wet locations, and corrosive environments.
  More Information on this Series

Code Master Strobe and Beacon Enclosed and Gasketed Fixtures
  Offers a means to warn of unsafe conditions or convey communication needs in Class I, Div 2, Groups A, B, C and D and Class II Div. 1 and 2, Groups E, F and G locations, wet locations, and corrosive environments.
  More Information on this Series

UL Listed ETP Raintight EMT Fittings
  UL Listed Raintight EMT fittings from ETP offer the exclusive InspectoRidgeTM external inspection aid. These couplings and connectors feature an internal sealing ring for raintight rating. The ridge on the external surface allows you to identify the item as raintight.
  More Information on this Series

Mercmaster III Emergency Battery Pack Fixtures
  Offers a means to instant on illumination during power failures in Class I, Div 2, Groups A, B, C and D and Class II Div. 1 and 2, Groups E, F and G locations, wet locations, and corrosive environments.
  More Information on this Series

ELS Series Explosionproof Emergency Lighting System
  Provides emergency lighting in the event of a power outage in Class I, Div. 2, Groups B, C and D locations. Available for use with remote and/or direct mounted fixture heads.
  More Information on this Series

MD2DS Series Factory Sealed Disconnect Switches
  Offers a means disconnecting loads in a Class I, Div. 2, Groups B, C and D locations. Available in fused and non-fused models.
  More Information on this Series

FV Series Nonmetallic Fluorescent Lighting Fixtures
  The ideal solution for corrosion in Hazardous Adverse Locations and compact spaces. Suitable for Class I, Div 2, Groups A, B, C and D and Class II Div. 1 and 2, Groups E, F and G and marine Outdoor Salt Water applications. These fixtures are also suited for use in non hazardous areas where dirt, dust corrosive atmospheres or high ambient temperatures are encountered.
  More Information on this Series

MD2SR Series Factory Sealed Interlocked Switched Receptacles
  Supplys power to stationary and portable equipment in a Class I, Div. 2, Groups B, C and D locations utilizing the Powertite® Series ACP plug, The MD2SR is also UL Classified when used with the Crouse-Hinds® APJ plugs. Available in fused and non-fused models.
  More Information on this Series

Div. 2 Contender Factory Sealed Control Stations
  Offers a wide range of Push Button, Selector Switch and Pilot Light options for use in a Class I, Div. 2, Groups B, C and D locations. Cover assemblies are UL classified when used with Course-hinds EDS Series mounting boxes.
  More Information on this Series

AEPGI Explosionproof Ground Indicator
  Provides a ground for tank cars or trucks before and during transfer of combustible materials in Class I, Groups B, C, and D locations. Visual indication of a ground, and interlocking circuitry are standard for added protection.
  More Information on this Series

ALPN, APPN and AGPN panelboards
  Fills the need for lighting, power, and GFI requirements in Class I, Groups B, C, and D areas.
  More Information on this Series

AETE and AGUB enclosures
  Ideal for instrumentation or meters in Class I, Groups B, C, and D areas. Window covers or solid covers are available.
  More Information on this Series

NEER™
  A complete line of die-cast zinc fitting for EMT, rigid conduit, AC/MC cable and liquidtite flexible metal conduit. NEER offers over 500 fittings to ground, seal, connect and secure conduit and cable.
  More Information on this Series

Weatherproof Products
  Offers a broad line of outlet boxes and extensions, covers, lampholders and lighting fixtures for wet, damp and dry locations, indoors or out.
  More Information on this Series

NEMA 4X Drain & NEMA 4X Breather
  Are new to Appleton and the Industry. The drain allows condensation within an enclosure or conduit run to automatically drain. The breather provides continuous ventilation to reduce condensation. Both are suitable for Class I, Groups B,C,D; Class II, Groups E,F,G; Class III Environments and both carry an industry first NEMA 4X Moisture rating.
  More Information on this Series

W Series Cast Iron Junction Boxes
  Offers 10 different styles in hundreds of configurations. These boxes are designed for many different applications: watertight, rain-tight, submersible, vehicular and pedestrian traffic, surface mount or flush mount to be used in sidewalks, tunnels, bridges, airports and convention centers.
  More Information on this Series

HUB-D Series Watertight Hubs
  Can be used in wet or dry locations, indoors or outdoors. Used to connect rigid metal conduit or IMC to a threadless opening in an enclosure, these diecast hubs have an O-ring for a NEMA 4X watertight seal and are suitable for Class I, Div. 2; Class II and Class III.
  More Information on this Series

To learn more call 1-847-679-7800 or click here to find these products in our Product Catalog.

Home  |  About Us  |  What's New  |  Product Catalog  |  Technical Resources  |  Contact Us  
 


 
  © 2008 EGS Electrical Group, LLC. All rights reserved.
Privacy Policy